+86 136 1198 8854
The beveling machine is specially used to polish the uneven angle, and the grinding performance is smooth without violation. Beveling machines are divided into portable beveling machines and desktop beveling machines. Portable beveling machines are mainly used for field construction on the construction site. Desktop beveling machines are mainly used for preset production lines in the workshop. The advantages of portable beveling machines are portable and far less efficient than desktop beveling machines, but each has its own advantages. However, both portable and desktop beveling machines have precautions, Here we summarize the following points:
****Point, professionals operate, non professionals please do not operate. Operators should be trained, have obtained corresponding certificates, and have good practical skills and ability requirements.
Second, before we use the beveling machine, we should check and screen all aspects of the beveling machine. For example, screws, mechanical rotation and instrument panel should be systematically and carefully checked before each use. It is a serious mistake to strictly alert those who directly operate and use the beveling machine as soon as they come up and ignore this link directly based on their old experience.
Third, when we use the beveling machine, please do not transfer tools and sundries on the beveling machine, and do not extend your hand into the rotation range of the beveling machine before the beveling machine starts. In the process of use, we should also remember not to put our face directly against the knife edge, which is a very dangerous thing and related to our life safety.
Fourth, when we operate the beveling machine, don't put any part of our body on the beveling machine. We must remember. If we have to, we need several people to work together to operate the beveling machine, but two people must work together, and the division of labor is detailed. The operation is under the unified command of one person. We can't operate indiscriminately without communication.
Fifth, when operating the beveling machine, if the beveling machine has an unusual sound or noise, we should immediately stop the operation and check the problem. When operating, sundries and all kinds of things fly all over the sky. Be sure to carry protective equipment, such as gloves and glasses, and do a good job of protection.
The sixth and most important point is that whether the imported beveling machine or the domestic beveling machine, the cutting tools are consumables. If the blade is worn and the cutting is not formed, the cutting tools must be replaced to ensure a longer service life of the machine.
Seventh, after the beveling machine is used, it shall be cleaned and maintained frequently. If it is not used for a long time, it must pay attention to the waterproof of the machine, and antirust treatment can be added on the surface of the machine so that the machine parts will not be damaged.
The above is about the relevant work flow of the beveling machine and what we should pay attention to.
FROM: GIRET CNC EDGE MILLING MACHINE, PLATE BEVELLING MACHINE, PIPE BEVELLING MACHINE
Website: http://www.krpdcs.cn
Our Factory Provides: Plate bevelling machine, CNC edge milling machine, Pipe bevelling machine, HMI plate beveling machine, Table edge beveling machine, sheet bevelling machine, self-propelled bevelling machine, Stainless steel bevelling machine, Steel bevelling machine, Portable groove machine, handheld groove machine, portable groove machine, portable edge milling machine, Portable plate bevelling machine, Portable edge shearing machine, sheet beveling machine, plate welding grooves machine.
